- RCM wireless control modules have a new 'hard button' design and are styled to match the WCM wired control panels. RCM units are modules only and always require a front plate kit either RVF (screw-fixing) or RLF (screwless). Single gang RVF front plate kits have surface mount options. Double gang and RLF options are for flush mounting only.
- The panel has addressing switches on the back to setup rooms and houses. Setting two panels with the same addresses allows two way control within a room. As these panels are selecting scenes stored within the dimmers having more panels does not give more scenes. Panels can either be surface mounted using the patress, which gives a depth of 14mm, or flush mounted into a standard single gang UK back-box. Panels are battery powered with battery life calculated as being 3 years, based on pressing a button 30 times a day..
- Externally powered versions of the panels are available.
|Dimensions||50x50x12mm - flush mount|
92x92x14mm - surface mount
|Fixing|| Flush mounting into standard UK single gang back box, minimum 12mm deep.|
Surface mounting on standard single gang UK or European back box or direct to flat surface.
|Input Supply||6V DC - 2x 3V Lithium coin cell CR2016 (remote power supply version available)|
|Battery Life||Greater than 3 years|
|Climate Range||Temperature +2C to +40C|
Humidity +5% to 90% non condensing
|Standards||Emissions - EN61000-6-3 : 2001|
Immunity - EN61000-6-1 : 2001
|Communication||Rakom coded fm radio, 433.9MHz|
|Memory||Flash memory (non volatile)|